Optical Power Meters / Light Sources

Fiber Optic Power Meters

3206A Optical Power Meter

3208A Optical Power Meter

High Power Fiber Optic Power Meters

3206C Optical Power Meter

3208C Optical Power Meter

Fiber Optic Light Sources

Fiber Optic LED Light Sources 



Complete Test Kits



Optical Loss Test Set Series 


3208A Optical Power Meter 

 

Features:

  • 4 digit, .01dB Display Readout

  • .15 dB accuracy, .01 dB linearity

  • 73 dB of Measurement Range

  • dB,dBm, & Watts Measurement Modes

  • Non-Volatile Storage of References and Mode Conditions

. 

The Model 3208A Fiber Optic Meter is a rugged, versatile, easy to use, high precision meter, that is state of the art in design and performance, and low in cost. This Fiber Optic Meter has been designed for todays, and tomorrow’s application. Calibrated at 850nm, 980nm, 1300nm, 1310nm, 1490nm, and 1550nm, the Model 3208A is measurement-ready in the traditional LAN, Telecom and CATV wavelength windows, as well as the newer 1490nm out-of-band requirements.

The Model 3208A comes standard with a FC/universal detector port that accepts FC, ST, SC, and E2000 connectors. Additional features include a large easy to read display with selectable backlight, extended battery life (240 hours), low battery detection, Auto shutoff / power save mode, damp, dust and waterproof design, and a user calibration mode. The Model 3208A Fiber Optic Meter has over 70dB of measurement range, with excellent linearity and accuracy characteristics across its measurement range. A rubber holster offers protection, while a padded softcase with pockets, belt loop, and carry strap, adds additional protection and conveinence. The Model 3208A Fiber Optic Meter is the perfect tool, for out in the field, in a manufacturing setting, or performing precision measurements in a Lab.

Model


3208A


(condition: 1310nm, -10dBm)

Optical Characteristics:

TA=23°C

Detector Type

InGaAs photo-diode

Spectral Response

800nm - 1700nm

Measurement Range:

+3dBm to -70dBm

Resolution

.01dB, .01nW

Uncertainty:

±.15dB

Linearity:

±.01 dB (condition: Unit stabilized & Zeroed at ambient environment)

Calibrated Wavelengths

850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm

Environmental Characteristics:

Temperature Range:

Operating

-10°C to +60°C

Storage

-25°C to +70°C

Humidity (non-condensing)

5 - 95% RH

Mechanical Specifications:

Size(mm) (with rubber holster)

152 x 74 x 26

Weight (grams) (with rubber holster)

200

Power Requirements:

Battery Type

3 - AA Alkaline

Battery Life (typical with Power Save disabled)

240 hours typ.(use of display backlight decreases time)

Interfaces:

Optical

FC/Universal detector port(FC ST, SC, E2000)

Accessories included:

Rubber Holster, Softcase



3208C Optical Power Meter 

Features:

  • +26dBm to -50dBm Measurement Range

  • 4 digit, .01dB Display Readout

  • .15 dB accuracy, .01 dB linearity

  • dB,dBm, & Watts Measurement Modes

  • Non-Volatile Storage of References and Mode Conditions

The Model 3208C High Power Fiber Optic Meter is a rugged, versatile, easy to use, high precision meter, that is state of the art in design and performance, and low in cost. This Fiber Optic Meter has been designed for todays, and tomorrow’s application. Calibrated at 850nm, 980nm, 1300nm, 1310nm, 1490nm, and 1550nm, the Model 3208C is measurement-ready in the traditional LAN, Telecom and CATV wavelength windows, as well as the newer 1490nm out-of-band requirements.

The Model 3208C comes standard with high power measurement capability, a FC/universal detector port that accepts FC, ST, SC, and E2000 connectors. Additional features include a large easy to read display with selectable backlight, extended battery life (240 hours), low battery detection, Auto shutoff / power save mode, damp, dust and waterproof design, and a user calibration mode. The Model 3208C Fiber Optic Meter has over 75dB of measurement range, with excellent linearity and accuracy characteristics across its measurement range. A rubber holster offers protection, while a padded softcase with pockets, belt loop, and carry strap, adds additional protection and conveinence. The Model 3208C Fiber Optic Meter is the perfect tool, for out in the field, in a manufacturing setting, or performing precision measurements in a Lab.



Model


3208C


Specifications:

(condition: 1310nm, -10dBm)

Optical Characteristics:

TA=23°C

Detector Type

InGaAs photo-diode

Spectral Response

800nm - 1700nm

Measurement Range:

+26dBm to -50dBm

Resolution

.01dB, .01nW

Uncertainty:

±.15dB

Linearity:

±.01 dB (condition: Unit stabilized & Zeroed at ambient environment)

Calibrated Wavelengths

850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm

Environmental Characteristics:

Temperature Range:

Operating

-10°C to +60°C

Storage

-25°C to +70°C

Humidity (non-condensing)

5 - 95% RH

Mechanical Specifications:

Size(mm) (with rubber holster)

152 x 74 x 26

Weight (grams) (with rubber holster)

200

Power Requirements:

Battery Type

3 - AA Alkaline

Battery Life (typical with Power Save disabled)

240 hours typ.(use of display backlight decreases time)

Interfaces:

Optical

FC/Universal detector port(FC ST, SC, E2000)

Accessories included:

Rubber Holster, Softcase



3206A Optical Power Meter 

 

 

Features:

  • Storage of 240 Data records

  • Downloads Measurements to a PC

  • Complete with PC Cable and Software

  • 4 digit, .01dB Display Readout

  • 76 dB of Measurement Range

  • Rechargable Battery System

  • Protective Rubber Boot

The Model 3206A Optical Power Meter is an inexpensive, high quality fiber optic power meter offering a complete solutions for the testing, storage and reporting of fiber cable attenuation measurements. Standard features include a 4 digit, .01dB resolution display readout, data storage of 240 measurements records, which can be uploaded to a PC for data archiving and reporting, modulated frequency detection, and a rechargable battery power system. Other characteristics include low battery detection, Auto shutoff / power save mode, 76dB of measurement range, .15 dB accuracy, 6 factory calibrated wavelengths, a versatile universal detector port that accepts FC, ST, or SC adapter caps. The Model 3206A comes complete with RS232 cable, PC upload software, Excel datasheet form templates, and a protective rubber boot. With its rich feature set, the Model 3206A fiber optic power meter is applicable in all of the traditional data and telecommunication testing applications, or as a laboratory bench-top tool for the testing of patchcord and other passive and active optical components and networks.

Model


3206A


Specifications:

Optical Characteristics:

TA=23°C ±5°C

Detector Characteristics:

Type

InGaAs photo-diode

Active Diameter

2mm

Spectral Response

700nm - 1650nm

Measurement Range:

+6dBm to -70dBm

Resolution

.01dB

Uncertainty:

±.15dB

Calibrated Wavelengths

850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm

Environmental Characteristics:

Temperature Range:

Operating

-10°C to +50°C

Storage

-55°C to +65°C

Humidity (non-condensing)

5 - 95% RH

Mechanical Specifications:

Size(mm)

180 x 90 x 36.5

Weight(grams)

300

Power Requirements:

Battery Type

8.4v NI-MH rechargable battery

Battery Charge Life

8 hours

Interfaces:

Optical

Universal detector port(FC ST, SC, etc..)

Data Download Interface

RS232 compatible via supplied cable

Memory Storage Capacity

240 Records



3206C Optical Power Meter 



 

Features:

  • High Power Measurement Capable, +26dBm to -50dBm

  • Storage of 240 Data records

  • Downloads Measurements to a PC

  • Complete with PC Cable and Software

  • 4 digit, .01dB Display Readout

  • 76 dB of Measurement Range

  • Rechargable Battery System

  • Protective Rubber Boot

 

The Model 3206C High Power Optical Power Meter is an inexpensive, high quality fiber optic power meter offering a complete solutions for the testing, storage and reporting of fiber cable attenuation measurements. Standard features include a 4 digit, .01dB resolution display readout, high power measurement capability (+26dbm to -50dBm), data storage of 240 measurements records, which can be uploaded to a PC for data archiving and reporting, and modulated frequency detection/identification. Other characteristics include low battery detection, Auto shutoff / power save mode, 76dB of measurement range, .15 dB accuracy, 6 factory calibrated wavelengths, a versatile universal detector port that accepts FC, ST, or SC adapter caps. The Model 3206C comes complete with RS232 cable, PC upload software, Excel datasheet form templates, and a protective rubber boot. With its rich feature set, the Model 3206C fiber optic power meter is applicable in all of the traditional data and telecommunication testing applications, and is especially suited for high power broadband/CATV and optical amplifier network applications.

Model


3206C


Specifications:

Optical Characteristics:

TA=23°C ±5°C

Detector Characteristics:

Type

InGaAs photo-diode

Active Diameter

2mm

Spectral Response

700nm - 1650nm

Measurement Range:

+26dBm to -50dBm

Resolution

.01dB

Uncertainty:

±.15dB

Calibrated Wavelengths

850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm

Environmental Characteristics:

Temperature Range:

Operating

-10°C to +50°C

Storage

-55°C to +65°C

Humidity (non-condensing)

5 - 95% RH

Mechanical Specifications:

Size(mm)

180 x 90 x 36.5

Weight(grams)

300

Power Requirements:

Battery Type

8.4v NI-MH rechargable battery

Battery Charge Life

8 hours

Interfaces:

Optical

Universal detector port(FC ST, SC, etc..)

Data Download Interface

RS232 compatible via supplied cable

Memory Storage Capacity

240 Records



Fiber Optic LED Light Sources 




Features:

This series of fiber optic LED light sources are low cost, fiber optic LED light sources, having good performance characteristics in a rugged compact package. Product offerings include a 850nm LED light source (3109-850), 1300nm LED light source (3109-1300), and a Dual LED light source (3109-8513). Standard features include Power On indicator, low battery detection, extended battery life, and CW, 270HZ, and 1 KHz out modes, temperature compensating power control circuitry. The fiber optic LED light sources utilize high quality SLED emitters, ensuring a high degree of core fill in standard multimode optical communication fiber (50um, 62.5um, 100um, 200um) allowing for consistent and meaningful network attenuation measurements. Typical coupled output power is -17 dBm into 62.5um core.



Model


3109


Specifications:







Complete Fiber Optic Test Kit Line

Kits having LED source(s) include two(2) ST-ST, 62.5, 3 meter simplex patchcords and ST mating sleeve. Kits containing Laser source(s) include two(2) FC-FC, singlemode, 3 meter patchcord and FC mating sleeve. We can supply hybrid patchcords in addition to, or as a substitute of the standard supplied patchcords, for compatibility to other connector styles. "DS" kits additionally contain upload cable and software.



Ordering Information:


est Kit P/N

Meter

Source(s)

Source Wavelength

Application

TK-06

3208A

3109-850

850nm

LAN

TK-07

3208A

3109-1300

1300nm

LAN

TK-08

3208A

3109-8513

850nm, 1300nm

LAN

Kits having LED source(s) include two(2) ST-ST, 62.5, 3 meter simplex patchcords and ST mating sleeve. Kits containing Laser source(s) include two(2) FC-FC, singlemode, 3 meter patchcord and FC mating sleeve. We can supply hybrid patchcords in addition to, or as a substitute of the standard supplied patchcords, for compatibility to other connector styles.

Purchases of electronic equipment is final.

Sys. Concept Inc.
P.O. Box 69151
Edmonton AB, T6V 1G7, CANADA
Phone: (780)479-1270  10:00AM - 6:00PM (Mon. to Fri.) Mountain Time;  (GMT -7:00; Greenwich Mean Time)
Fax: (780)471-5665
FWD: 491581

Contact us: for secure communication use our public PGP Key