FMA Adapters
Patch Cord Adapters for Nearly Any Connector Available

Products/Parts List:

FMA Adapters
Patch Cord Adapters for Nearly Any Connector Available

All FV series scopes are bench-top video microscopes designed for inspecting patch cords and ferrules just after polishing. They are available in several magnifications, but in general, our “400x” models are used after polishing to inspect for fine defects incurred during the polishing or cleaning process. The “200x” models are most commonly used to inspect for cleanliness during system assembly prior to mating connectors.

Westover FV systems have become the industry standard because they deliver crystal clear imaging of fine defects. These systems include a valuable feature not found anywhere else in the industry. When depressed, our ScratchView button provides a specialized contrast enhancement algorithm over the surface of the glass fiber. This filter makes fine defects readily detectable and dramatically reduces the need for extensive training of technicians. Using this feature can help cut down on disputes between vendors and customers as both sides will see everything.

It should be noted that we have taken liberty with the magnification values we state with these models. Actual magnification is dependent on monitor size. Actual magnification can be determined using the technical bulletin linked below.

Westover Scientific occupies an enormous market share in bench-top video inspection. We have accomplished this by providing rugged, simple microscopes that deliver a superior level of detail than microscopes 10 times the cost. While this claim may seem exceptional, we invite you to compare our FV series to any on the market today. Like most process engineers in the world, we are sure you’ll find the value unmatched.

The FVDW series are our dual integrated workstations. These units feature a microscope base attached below the monitor. This integration saves space on the table and eliminates cumbersome cables. In the base, we incorporate two patch cord microscopes with an A/B switch to select which image is displayed on the monitor. These units are popular for a number of reasons. Some users prefer dual workstations because it allows them to insert one type of adapter on the left side and a different one on the right side (ie: Universal 1.25 vs. Universal 2.5, MTP vs. SC, etc.). This reduces the time to inspect as you do not have to change adapters frequently.

Other users prefer dual workstations because they can choose a 200x system on the left and a 400x system on the right. This allows for precision inspection of the glass followed by a wide-field inspection of the contact zone for contamination.

FMA Adapters
Patch Cord Adapters for Nearly Any Connector Available

Combination Worksations
Combination Workstations for Male/Female Connector Inspection on the Bench

Products/Parts List:

FMA Adapters
Patch Cord Adapters for Nearly Any Connector Available

FBP Professional Probe
Professional Grade Probes

Display

Hand Held Display
Hand Held Video Displays for Use with Probe Scopes

Westover continues to lead the industry by providing ruggedized drop-tested Liquid Crystal Displays for hand held field use. We offer two primary solutions and several options within these categories.

  HD1 product line offers the highest level of performance and proven success. Features include:

• 3.5” TFT LCD with front-mounted contrast adjustment
• Removable Sony® lithium ion battery with 3 hours continuous run time (extended using auto-shutoff feature)
• Built-in power management system
• Adjustable auto-shutoff feature to preserve battery life. Settings for 10 seconds, 30 seconds, and infinite run
• Fuel gauge showing remaining battery life
• Built-in charge feature so you can use while you charge
• Built-in hanging accessory for hands free operation
• Ergonomic design

The HD2 product line was developed as an economical alternative to the HD1. It is available in several configurations, and in some ways offers more versatility than the HD1

• 3.5” TFT LCD with contrast adjustment wheel at the bottom of the display
• Removable 8 AA battery pack providing 6 hours run time using recommended Alkaline or NiMH rechargeable batteries. NiMH batteries must be removed to be recharged.
• Integrated Grip-Switch feature turns unit on when you hold it in your hand. The GripSwitch can be disabled for traditional on/off functionality, but this feature can dramatically extend battery life for hand held use.
• Built-in table stand
• Optional modules for patch cord viewing and/or integrated visual fault locator (explained below)

For the HD2 line, the optional modules are designed to deliver more utility at highly competitive prices. The integrated patch cord module has two major advantages. First, it allows the user to install a patch cord adapter (for male connectors) on the display and a bulkhead tip for an external probe on a single system. This allows the user to inspect both the male and female connectors without having to change tips. This saves considerable time and cuts down on lost tips and adapters.

For users who are currently inspecting male patch cords with hand held optical scopes, the patch cord module dramatically changes the ergonomics of the application. Whether the scope is all-optical or a non-direct view, these devices require the user to insert the patch cord and then hold the scope to their eye. This is nearly impossible when the patch cord is restrained by cable management and located either very high or low in a rack or distribution frame. Using the HD2 display with its patch cord module allows the user to bring the microscope to the patch cord and then view the image from a comfortable distance.

The HD2 is also available with an integrated visual fault locator (VFL). VFL’s are essential tools for troubleshooting newly spliced or terminated assemblies and for helping check dead-zones within OTDR traces. They are used widely throughout the industry and often command over US$350 as stand alone devices. As an upgrade to an HD2, the increase in cost is less than US$175! Further, as both probe scopes and VFL’s are common tools in troubleshooting, why not get them in one package with one set of batteries and at a lower cost?

Westover’s line of hand held displays offers the highest level of versatility and performance. The diverse offering is the result of a decade of feedback and responsive engineering.

Products/Parts List:

Computer / USB Module
USB Modules for Connecting Standard Probes to PC's

All of Westover’s probes (excluding the FBP-P5000) can be interfaced to a PC using a USB module. These modules include image compression chip sets and port to a USB 1.1 port or higher. That makes them ideal for use with older computers.

Further, as they interface to a standard probe, buying this module allows the user to switch between use with a PC and use with a hand held display (as opposed to an FBP-P5000 probe which is digital-only and requires a PC). This is particularly valuable for users who are not sure they will always have access to a PC. Frequently, we’re told users sometimes have a laptop, but when they don’t, they still want a means for viewing an image. In those applications, we recommend they buy both a USB 1.1 module and a hand held display for maximum versatility.

Further, if the user has an older PC (less than a P4 with 1 gig RAM), the USB 1.1 module likely required because the PC will not be able to handle the requirements of the FBP-P5000 probe. For users who know they will always be using the probe with a relatively modern PC, we strongly recommend they choose the FBP-P5000 over a USB 1.1 module.

USB modules are available with either 4-pin or 6-pin inputs. Users should choose a model that matches the probe they have selected. If you haven’t purchased the probe yet and are planning on using the probe with a PC (at least sometimes) we recommend you choose a 6-pin probe and a 6-pin USB 1.1 module. Doing so will give you the Quick Capture button mounted on the probe. This function will provide huge benefits in actual use.

Products/Parts List:

Professional  Probe Kits
Professional Grade Video Probe Kits for Field and Factory Applications

Westover’s FBP-S series kits are by far the most common worldwide for video-based field fiber inspection. These kits use the industry-defining FBP series probes, HD1 displays, and precision FBPT tips to deliver professional grade performance. There are many kits to choose from. If you do not see the configuration you are looking for, please check the system configuration matrix or consider buying the system as component parts.

Products/Parts List: